Before installing industrial air conditioning in the warehouse workshop, a series of inspections are required to ensure the smooth progress of the installation process and the normal operation of the air conditioning equipment. The following are the main issues that need to be checked, divided into points and summarized as follows:

1. In terms of power supply

Power line inspection: Ensure that the power line is strong enough and meets the usage requirements, and check whether the power line is correctly connected to the load without damage, aging, or other conditions.

Electrical component inspection: Check the integrity of electrical components to ensure that the power supply and circuit meet the equipment requirements.

2. Pipeline aspect

Pipeline inspection: Check whether the pipeline meets the design and specification requirements, including pipe material, diameter, bend radius, etc.

Pipeline pressure check: Ensure that the pipeline pressure is within the design pressure range.

Drainage slope and drainage point inspection: For the drip tray at the lower part of the cooling section and spray section, the drainage slope should be checked to ensure it is sufficient, and the water seal at the drainage point should be checked to ensure reliability.

3. Equipment and material inspection

Equipment appearance inspection: Unpack the air conditioner and check whether the appearance of the equipment is intact and undamaged to ensure the quality of the equipment.

Insulation layer inspection: Check whether the thickness of the insulation layer of the unit meets the requirements, whether the insulation material is evenly laid, and whether there is a cold bridge at the connection of each functional section.

Fire prevention requirement inspection: Check whether the insulation materials of the unit meet the fire prevention requirements, which should be non combustible or non combustible materials, and should have an approval certificate from the fire department.

4. Cooling and heating effect inspection

Cooling and heating effect inspection: Check the cooling and heating effects of the air conditioner to ensure that there are no leaks in the pipelines and that the compressor is working properly. At the same time, check whether the cooling and heating effects of the indoor and outdoor units are normal.

5. Installation location and environmental inspection

Installation location selection: The installation location of the air conditioner should be chosen in a well ventilated area that is not directly exposed to sunlight, and ensure the safety and stability of the air conditioner. Avoid choosing areas with restricted air circulation.

Anti vibration and noise reduction inspection: Check the quality and length of the pipes and shock-absorbing pads to ensure they are suitable, and the shock-absorbing pads are intact, in order to ensure the anti vibration and noise reduction effect.

6. Other inspections

Electrical wiring inspection: Carefully inspect the electrical wiring to ensure that the connections between indoor and outdoor units are correct, and that there are no loose joints or aging wires in the electrical junction box.

Drainage pipeline inspection: Ensure that the drainage pipeline is unobstructed to avoid problems such as water droplet overflow and water tank overturning during use.

summarize

Before installing industrial air conditioning in the warehouse workshop, a comprehensive inspection is required, including power supply, pipelines, equipment and materials, cooling and heating effects, installation location and environment, and other related aspects. These checks can ensure the smooth progress of the installation process and the normal operation of the air conditioning equipment in the future.